Anycubic Mega Zero 2nd Z Leadscrew Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Remix - the various versions are: v8 = 2 Point Mount (The simple option)v14 = 3 Point Mount (now with a…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 1055
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Remix - the various versions are:
v8 = 2 Point Mount (The simple option)
v14 = 3 Point Mount (now with a bigger cut-out for the 3rd wheel bolt)
v18 = 3 Point Mount with extra Z height clearance for Z-Screw Anti-backlash nuts & 4mm mounting Bolts. Available in Right and Left Side versions.
The main enhancements are:
1/ Added extra reinforcing to improve rigidity
2/ Reinforced gantry mounting holes
3/ Made it adjustable so you can ensure your lead screw is parallel with the gantry
I recommend drilling out the frame mounting holes to 5.5mm to ensure it fits well and there is enough adjustability.
For the 3 Point mounts I used 3x M5 x44mm + the two stock M5 Nylock Nuts.
Print this at 50% & Cubic infill with 6 Top / Bottom Layers / Wall Lines for maximum strength.
You can find my fullDual Z-Screw Guide for the Anycubic Mega Zero Printers here:
https://www.thingiverse.com/thing:4810046
Print Settings
Printer:
Anycubic Mega Zero
Rafts:
No
No
Resolution:
0.2
50% Cubic
Filament: X3D Pro PLA White
Category: 3D Printer Parts