Filament Runout Sensor & Feed-guide for Anycubic Mega Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Remix of 2 Different Designs: Filament Sensor Case by @STIG_ :https://www.thingiverse.com/thing:2443425 For…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a Remix of 2 Different Designs:
Filament Sensor Case by @STIG_ :
https://www.thingiverse.com/thing:2443425
For details on how to install and use the Filament Sensor, please see the above Design. it's designed to work with the cheap and readily available MakerBot style End-stops.
https://www.aliexpress.com/i/4000602284637.html
Filament roller guide by @Calvin_MegaZero :
https://www.thingiverse.com/thing:4626077
This design aligns perfectly with the input to the MZ1 extruder drive so if you like you can have a single piece of Bowden tube running straight from the sensor to the extruder input.
To add Bowden tube to either side of the Sensor, simply drill out the holes with a 4mm drill bit.
This design is compatible with the "Low friction filament guides" for the MZ1.
https://www.thingiverse.com/thing:4630961
https://www.thingiverse.com/thing:4723456
Print Settings
Printer:
Anycubic Mega Zero
Rafts:
No
No
Resolution:
.20
25% Cubic
Filament: X3D Pro PLA & PETG Black & White
Notes:
I printed the Mount in PETG and the Sensor in PLA.
Category: 3D Printer Accessories