Upright go USB c connecter for necklace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB c connector for Upright go 2 to be worn as a necklace Allows small USB c devices to be carried via a lanyard
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
I couldn’t be bothered to buy the authentic necklace for the Upright Go 2 seeing that I have a 3D printer.
this was made to fit very snug so that it will easily hold the device. Printed with large base at the bottom, no supports needed.
I printed this with PETG, 0.4nozzle, 0.25 layer hight and enough perimeters to ensure it prints solid. I also suggest you print it on the hotter side of your PETG range and print it very slow to ensure the best possible layer adhesion. Perhaps also print a test version first and test that your print come out strong before you plug it into the device - and do the latter at your own risk.