Office chair caster stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents your office chair from rolling when needed
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The print is made from 2 parts: the top part needs to be printed with a solid material (PLA, PETG etc.) This is made to fit the wheels of the chair, up to 50 mm in diameter. The bottom part needs to be printed with TPU, so it doesn't damage the floor and provides grip. The holes on the top part allign with the pins on the bottom part, use an adhesive (double sided tape worked for me) to connect the 2 parts together.
Print one for each wheel. If your wheels are smaller or larger you can scale the model accordingly
I use it for sim racing with a load cell pedal, the chair doesn't move during driving. It takes less than a minute to install and you can remove them just as quick when you don't need them anymore.