1 / 2
Garden hose screw connector 3/4, inner dia 19mm — zdjęcie 1
1 / 2

Garden hose screw connector 3/4, inner dia 19mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Garden hose screw connector 3/4, inner dia 19mm, material cost about 31gram ( cca 0.75eur )

Ocena
5 / 5
Polubienia
43
Pobrania
361
Wydruki
2
Wyświetlenia
1698
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

¾ Garden hose screw adapter. 

Screw is 32 x 1.5mm so low layer height  is must.

0.15 layer height
3 perimeters
"Outside perimeters 1st" option in slicer.

material - suitable for outdoor, Don't use PLA

Body: needs support “on plate only”, inside brim. (do not resize)
Nut-test: - print, test and scale X,Y only, Do not scale Z axis!!!. (it's fits on mine ASA prints, 
Nut: resize if needed and  0.15hight  3 perimeters should be fine.
Ring: It's a bit tricky print, I suggest print two at the same time, Do not use brittle filament here.

There is freecad source file. (needs fasteners plugin)
So you can now make different connections.

Do not try 1mm thread size, looked gread, but  its to weak, plastic will expand under forces and slip ASA.

my 1st public model.. have fun, I tried to make it easy to modify.

Tagi