Sony wf-1000xm3 dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Docking station for sony earphones (WF-1000xm3)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Standard Digital File License
I was looking for a clean docking station for my new Sony wf-1000xm3 earphones. I couldn't find them around here so I made one (with some inspiration from other phone docks around here) myself. I designed it in Solidworks in around 45 min.
It is a perfect fit and the case slides right in without damaging it.
No sanding needed if you use the original (short) USB C cable.
I taped the cable at the underside, you could also use some glue to keep the charger in place.
It is a fairly easy print without the need of a surface adhesion nor supports.
Print time is around 9 hours with a speed of 35 and the other mensioned settings.
PLA
0.2 mm layer height
15% infill
no supports
no brim