Screwdriver holder for Bott Perfo pegboard (with variations)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for perforated pegboard with variations for small, medium and large screwdrivers.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a bracket for a square perforated board (bott perfo branded, sold by bigdug.co.uk) to hold screwdrivers.
I have designed variations for:
- small files (6x against 4 pegs)
- medium sized screwdrivers (5x against 5 pegs)
- large screwdrivers (6x against 6 pegs)
See my other Bott Perfo pegboard models:
- Drill bit support for Bott Perfo pegboard
- Driver and drill bit holder 1/4 hex for Bott Perfo pegboard
All models fit the pegboard without ‘wasting’ pegs - by this I mean that multiple can be printed and fitted to contiguous pegs. Or in other words, the horizontal space that the model occupies does not interfere with the next model if the next available peg is used (see photo with 2 supports).
I print the brackets in PLA, with a relatively high infill and supports. I'm sure PETG would work as well if not better.
The perforated board has square holes with a 9mm side, spaced 40mm apart (centre-line to centre-line of each hole) horizontally and vertically.