SX1P Mill Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool organizer for the LMS4700 HiTorque Micro Mill and other Sieg SX1P Mills. Holds the most commonly used tools.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A tool organizer for the LMS4700 HiTorque Micro Mill and other Sieg SX1P Mills.
Holds the two included wrenches, the drawbar key, a drill chuck key, and the spindle wrench. Requires a 4 mm pin for the spindle wrench holder.
It is attached to the mill by two countersunk M4 screws, which have been drilled and tapped into the mill side. (I placed a piece of tape on the inside to avoid spreading swarf inside the mill head)
It's my first design, so it is by no means perfect and has some areas where it can be improved. In particular, any next iteration should angle the hole for the 4 mm pin upwards slightly in order to prevent vibration from loosening the spindle wrench holder; that being said, it is functional for storage.