XL4015 Buck Converter Module Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple enclosure for the XL4015 Buck Converter Module that can be found all over eBay/AliExpress. Since the…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a simple enclosure for the XL4015 Buck Converter Module that can be found all over eBay/AliExpress.
Since the module has no mounting holes, I designed the case so the module can be mounted to the bottom part with double sided tape. The bottom part has 2 screw holes for mounting, and the top cover just snaps on.
Make sure to secure the cables inside the enclusore, I used cable ties for this.
Just note that the buck converter gets very warm (>60°C) if you use it at 3 ampere and above, so PLA might not be the best choice for filament.
I have also included the Fusion360 file for ease of customization.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
No
Supports:
No
200
Infill:
38
Filament:
add:north PLA Black
Category: Electronics