Windwaker/Cartoon Bomb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own take on the classic Windwaker/Cartoon Bomb Design
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
While working on my next big project, I got a little burnt out and wanted to just print something simple and fun: One of the classic Zelda Bombs. However, most of the ones I found weren't exactly what I was looking for.
So I made my own. I wanted to add a bit more detail to the fuse than others I'd seen to make it look more like rope that was being burned at the end.
It's in three pieces (the bomb, the cap/fuse, and the pin for assembly), so it should be very easy for you to print in any color combinations you want.
I decided to simply paint the fuse instead of printing the tip in multiple colors.
----------------------
Printing:
If you want a nice, clean, round bomb, print at the smallest resolution possible for your printer. It shouldn't need any supports anywhere.
I used 3 perimeters and 35% infill for some extra heft, but you can cut print times down by going to 2 perims and 20% infill easily.