Cable clip vertical (including Opel/Vauxhall Astra)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I rotated the cable holder for vertical fan outlets. Edit 21-6-2019: My Open/Vauxhall Astra Sports Tourer has a bit…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I rotated the cable holder for vertical fan outlets.
Edit 21-6-2019:
My Open/Vauxhall Astra Sports Tourer has a bit "special" designed fan duct, so I created a USB cable holder specific for this car.
Since the "hook" on the cable holder is just a bit too wide for the small fins but I don't want the printer to go any closer to risk it will "grab" during printing, I adjusted it after printing.
Just took the clip from the bed, heated the bed to 65 degrees C and placed the clip sideways on the bed for a minute so i could bend the hooks closer together. Now it fits like a glove.
Printer settings:
Layer height: 0.16
Infill: 25%
Support:
-Regular clip: None
-Astra clip: Yes
Category: Automotive