Crosley Radio Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knob that I made in fusion 360 to replace one missing from my father's Crosley CR-9 Select-o-matic
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a knob that I made in fusion 360 to replace one missing from my father's Crosley CR-9 Select-o-matic (an AM/FM/Cassette player styled to look like those mid twentieth century tabletop jukeboxes that you'll see at Johnny Rockets and similar places).
The photo shows one of the originals that I used for measurements, and the resulting print. I've made a small change since the photo, to fillet the edges of the knob and the ridges a little. The original is chromed plastic, so matching with a filament would've been quite difficult. We cared more about functionality.