Quansheng UV K5 / K6/ K8/ Plus car mount angled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled car mount for the Quanshenkg KV 5/6/Plus I made for my Volvo s60 2006, but should fit other radios/cars as well.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 289
- Wydruki
- 0
- Wyświetlenia
- 3611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Perfect fit with no rattle car mount for your Quansheng UV K5/6/ Plus radio on the passenger side ( in my case a Volvo S60 2006)
Locks in nicely with a satisfying click with no shaking or rattle while driving.
Use double sided foam sticky tape.
Mounting Tipp:
Before you peel off the double sided tape foil, position your mount with the K5 clipped in, so you can align it precisely as you want it to be. Gently press it on the desired area, then detach the K5 from the mount an press the mount hard against the surface to make it stick for good.
ATTENTION! it can get quite hot in a car standing in direct sunlight so PLA probably is not the best choice for this! ABS will do the trick! If you cant print ABS use at least some more heat resistant material then PLA, PETG probably (but even that could be not stable enough)