Universal Cardboard Spool Adapter (TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reusable cardboard spool adapter made of TPU that should fit into a lot of different spools.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This adapter can prevent the build-up of dust caused by cardboard spools rubbing against the filament holder.
I wanted an adapter that would fit spools with different inner diameters because I already had spools with diameters from 52mm to 55mm. It was also important to me that I could remove it and use it in other spools without breaking it (like other adapters made of PETG or PLA which I tried before).
This adapter is designed for 54.5 mm spools, but thanks to the flexibility of TPU it also fits 52mm spools. The inner diameter is 46mm.
Of course you can scaled it if it doesn't fit or if you want to use spools with other diameters.
Printing
- Filament: TPU (I used Overture TPU 95A)
- Layer Height: 0.2mm (doesn't matter I guess)
- No supports