Hallowen Hair Pin Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hair pin collection for easy color change printing
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Halloween hair pins requested by a 4 year old and designed by mom for dad to make.
The hair pins were all designed to be printed with M600 color change using Prusa slicer. Each design (excluding mount) should have the same color change layer to allow printing multiple designs in one print. The small mount to secure bobby pin. Mount was glued to back of design. I printed mine in ASA from Prusament, Fillamentum, Raise 3D.
Hair pin mount file is a small part and should be printed with a 5mm brim. Leave brim attached and glue mount to design with brim up. I used 3M plastic adhesive #03601 but any high strength adhesive should do. (see pictures)
Prusa MK3 0.4mm nozzleX 0.1mm layer height M600 command at 1.6mm
ASA 240-255 Nozzle 110 Bed Printed in Enclosure