Digital Joystick (Amiga, C64, Atari etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had some parts spare so made a housing for it. Joystick is a Sanwa style. The flat round dust cap for the stick fits…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 896
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I had some parts spare so made a housing for it.
Joystick is a Sanwa style. The flat round dust cap for the stick fits into a recess in the top housing and is fitted before the stick is mounted. The sleeve and ball are attached from the top as usual.
The rectangular plate for the stick fits over four studs in the top part of the joystick housing. The mechanism is held in place by two supports that rise from the bottom of the joystick housing.
The buttons are 30mm, I have used Crown but snap-in buttons should fit also as long as they do not have the extended switches or terminals.
Cable is from an old Wico joystick.
Fit five M3 nuts in the columns. Five 12mm M3 bolts hold the stick closed. Stick rubber feet on the bottom.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.30
Infill:
20
Filament:
MG Chemicals PETG Black
Category: Computer