1 / 4
Rotating 100mm VESA monitor mount — zdjęcie 1
1 / 4

Rotating 100mm VESA monitor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I picked up a 2008 iMac from the kerbside and found it had a bad screen. Not worth replacing. But I like the aluminium…

Ocena
5 / 5
Polubienia
9
Pobrania
57
Wydruki
1
Wyświetlenia
876
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I picked up a 2008 iMac from the kerbside and found it had a bad screen. Not worth replacing. But I like the aluminium foot design on these things. I have some monitors that I wanted to use for MiSTer FPGA without rotation, and rotation is pretty handy when switching between various arcade games. This 3-piece print adapts the 100mm VESA mount on most monitors via a rotating coupling to the Apple iMac aluminium foot.

You can't really print this without supports unfortunately, and if you don't clean them off well the rotation won't work well at all. I printed this at .30 layer height as a draft and didn't expect it to be the final but it works fine. I sanded the part that connects to the monitor slightly, also applied some Tamiya ceramic grease to the surfaces that will contact. After that it still feels stiff but the monitor is a substantial lever and you should have no difficulty rotating once it is assembled.

Assemble the two halves around the VESA mount with M3 bolts. I also used M3 bolts with nylock nuts to fasten the assembly to the aluminium foot. The VESA bolts are M4.

The iMac foot is calibrated for a certain weight of course. If you put a 30" monitor on there it will just sag; a 15" monitor will just point at the sky. 20" is about the right weight.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

.30

Infill:

20


Filament:

Prusament PETG Carmine Red

Notes:

This may fail; I expected this to be a draft only and would have printed the final version in black and at 100% infill, but so far it's OK.

Category: Computer

Tagi