Mini Rachet Bitdriver with Rachet Lock* (Print in Place) (Mk1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Fully Print in Place Rachet Bitdriver with a wheel to maually stop the rachet
- Ocena
- 5 / 5
- Polubienia
- 671
- Pobrania
- 1007
- Wydruki
- 6
- Wyświetlenia
- 7221
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you want to support me or get commercial licenses, you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D
A mini ratcheting screwdriver build around a standart (Bosch) Bit extender, which is therefore pretty sturdy and allows ergonomic small space handling!
Works with PLA but use preferably PETG and ABS.
Mk2 Version is out!:
https://www.printables.com/model/832018-mini-2-way-rachet-bitdriver-print-in-place-mk2
it adds a two way ratchet system! It doest compleatly replace the old version as the old design is slightly simpler to print, but nearly every modern printer should be compatible with Mk2
If there is enough interest I might make a bigger version too! :)
NEW: I also made a fidget toy based on the ratchet mechanism:
https://www.printables.com/model/829742-ratcheting-fidget-toy
Features
- Rachets while screwing in (and out as in different Versions)
- * A wheel to grab for locking the driver (better print both versions to use one driver for tightening and one for loosening)
- As small as possible while accomodating the bit extender as a sturdy core piece
- A ergonomic compact handle design to reach into small spaces
- Fits almost any commen drill bit
- Adjustable: Depending how deep you pressfit the Bit extender you can adjust the drivers length and shape (~20mm length increase possible if needed)
- Adaptive: Also through the rachet it can freely rotate in one direction but not in the other direction. (But you can stop that by gripping the wheel)
You need: A most standart bit extenders from most drills work!
Printing Orientation
- print with no supports and the rachet facing down
- Use a brim if needed but only on the outside!
Press the Bitextender in from the front. This extender is securely held in by friction!
I Hope you like it!
Happy printing!
More Models from me
my art & design collection (sorted by poularity):
https://www.printables.com/@universalmake_168616/collections/1168670?o=liked
my organizers & practical prints (sorted by poularity):
https://www.printables.com/@universalmake_168616/collections/1168667?o=liked