Amiga 600 internal mount for Goex drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did not like the included mount much so I made this one. Simple, secure. Supports are only necessary on the raised…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I did not like the included mount much so I made this one. Simple, secure. Supports are only necessary on the raised screw tab as shown in the image - use a support blocker on the rest of the print.
M3 hex nuts slot into the cuts in the side of the pillars, providing a solid thread for the mounting screws. If the nuts fall out just secure them with a dab of glue or blue tac or anything you like.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
200
Infill:
38
Filament:
PolyMaker PETG
Category: Computer