Lenovo M73 / M93 SFF horizontal gpu mount

I needed a small mount to be able to hold stabilize/hold my standard size (full height) gpu card (GTX 1050 Ti) in my Lenovo M73 small form factor pc horizontally with my pci-e x16 riser cable.

I designed and printed this to help keep things secure in the case.

I must call out ahead of time, that this might not fit all cases and might require some trimming and or sanding of the mount to make it fit. I had to remove the stock CPU fan shroud, but it does not seem to impact cooling performance too much. Even with that, it will be a very tight fit.

It is highly recommended to use a good quality riser cable as the video card signa / performance can be reduced otherwise.

Parts list:

• 10CM / 100mm PCI-E 16x riser cable with 90 degree socket - https://www.amazon.com/gp/product/B07K6VBH9S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• Double sided foam tape
• low profile 90 degree up adaptor (something lower profile might be better) - https://www.amazon.com/gp/product/B07B9JNK1W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• Low profile 90 degree left hdmi extension (something lower profile might be better) - https://www.amazon.com/gp/product/B07333MM7J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• hdmi panel mount pass through (this moves the cable to the standard io output) - hdmi panel mount pass through

I had to remove the gpu's metal io backplane, and used a combo of the hdmi up and 90 left extension to route the hdmi cable through the case to avoid tension on the gpu connectors and reduce cross ventilation obstructions.

The m73 has a knockout in the backplane that accepts a standard hdmi passthrough.

I used standard foam double sided tape to secure the mount to the top of one of the usb io metal housing casing, and to the riser cable which is stuck to the inside wall on the metal case also using double sided foam tape.

The rise cable I used includes a locking mechanism like on motherboards so the video card is secure. I used some small (~ 2mm thick) sticky rubber bumpers on the top of the mount to help level the card to the mount.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: yuyi petg black

Notes:

Category: Computer