1 / 2
FRC Clippard Air Tank Mount - Single and Dual
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some simple mounts to hold Clippard air tanks to 1x1in framing on FRC bots
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Designed and tested by FRC 9522.
Simple mounts for Clippard air tanks, mount to 1x1in framing, the mounting arm holes are for #10 bolts, and the arms are 1/4in thick, so you'll need mounting hardware greater than 1-1/2in.
Recommended to print two per tank if using the single mount/tank pair if using the dual mount.