Rik's filament buddy for easy estep calibration and measurement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are you having difficulty with measuring your filament for your Esteps?
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is an old model imported from thingiverse. I was young, and didn't really know what I was doing, so take some of the things with a grain of salt.
(For a instructional video please scroll down)
Are you having difficulty with measuring your filament for your Esteps? Well, I say no more! with my filament buddy you can easily mark and measure your filament while it is held straight by the filament buddy! you are now able to mark your filament easily because of the built in measurements i have made to the model. Because your filament is held straight you are less likely to make inaccurate measurements and are also less likely to mark the wrong distances.
The pro's of using the Filament Buddy:
- Ease of use
- Straightens filament
- Easy marking
- Easy measuring
- Simple and cheap to print ( 3g of filament and 46 minutes with 50mm/s)
- Holds the filament tight enough so it doesnt move around
Don't withhold yourself from printing Rik's filament buddy today! You will not regret it, I am sure of that!
Please print one of these models:
A. when you have a 1.75mm filament please print: Rik's Filament buddy 1.75mm.stl
B. When you habve a 3mm Filament please print: Rik's Filament buddy 3mm.stl
You are welcome to print it and Remix all you want (unless you want to sell the design)
Happy and accurate 3D printing to all of you!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
10+% recommended
Filament: Eryone PLA Blue
Notes:
10%+ Infill recommended
The used material doesnt really matter that much
The color of the filament also doesn't matter neither does the brand.
But ensure you print Rik's Filament Buddy with a 0.12mm layer height to make sure you have the best filament buddy possible, even at this layer height it takes about 45 minutes to print with a 50mm/s speed
showcase (might be a bit cringy)
Rik's Filament Buddy instructional video (might include a bit of cringe)
Category: 3D Printing Tests