AA-Batteryholder by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Batteryholder is designed to use as little material as possible. Less can be more! Easy to assemble and easy print!
- Ocena
- 4,818 / 5
- Polubienia
- 114
- Pobrania
- 331
- Wydruki
- 14
- Wyświetlenia
- 1743
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About:
When I got into 3D printing in 2019, the models were ASAP. ASAP = As Simple As Possible. The old AA battery holder originates from this time. This principle has not necessarily changed but I gave myself the challenge to use even less material. That's how this kit came into being. Each individual part is fragile but stable when used and assembled correctly.
In this context, I would also like to thank the 3D printing community, because the two years have shown me how many problem solvers there are out there. Keep up the good work!
Check: AA-Batteryholder by KMS_Changelog.pdf .
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS: Feel free to support my work by liking or leaving a comment.
Updates and Upgrades
| Change / Update | Release | Version | Change |
Assembly:
1. Take a side part and insert the "guides" first. Pay attention to the alignment of the chamfers. It should be parallel to the back or front. Then insert the Back, Front and Bottom. Some force might be acquired for the guides.
2. Put on the second side piece and align it. Then press the model together. The side parts and the front, back and bottom are flush.
3. Finally, pull the bottom part forward and press the front and the back down. Done. The battery holder has sufficient stability.