1 / 4
Aufhänger für Bilder/Puzzle / Picture Hanger — zdjęcie 1
1 / 4

Aufhänger für Bilder/Puzzle / Picture Hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Schnell zu druckender Aufhänger mit Verschiebemöglichkeit zum Ausrichten des Bildes. Easy and fast to print Hanger.

Ocena
5 / 5
Polubienia
35
Pobrania
402
Wydruki
3
Wyświetlenia
1177
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bildaufhänger zum Aufkleben mit genügend Möglichkeiten das Bild zu verschieben um es gerade auszurichten ;-)

Dazu passende Abstandshalter.

Ich habe ihn entworfen um ein Puzzle aus Holz aufzuhängen.

Der Aufhänger ist 40x35x5 mm.

Gedruckt in PLA, keine Supports, Infill egal.

 

------------------------------


To hang your picture frame or puzzle on to the wall and get it straight.

Glue the hanger onto the middle of your frame or puzzle, if your frame does not have a border glue the spacers also on the back to hang it flat.

Size is 40x35x5 mm, so will also hold a heavier picture.

Printed in PLA, no Supports, Infill does not matter.

Tagi