Surface Pro Vertical Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raised stand to hold a Surface Pro 7 with bumper case and keyboard cover vertical next to a monitor.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Surface Pro vertical stand. Holds Surface Pro with bumper case and type cover. Adjustable height.
Required “vitamins” - aluminum c-channel trim for 3/8 - inch plywood cut in two 12" lengths, and drilled at 1" intervals. 2 m3x10mm screws.
Upper section printed in two pieces to fit Mk4 via Prusa Slicer's split function…. On two attempts (one for home, one for office) supports weren't supporty enough for the lower corners of the retention hooks, but a little clean up of that part with a hot iron saved the prints.
Fit checked successfully with Surface Pro 7 with bumper case and Surface Pro 4 without.