Magnetic Cube Background Box - Panel connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This connector allows to extend the Magnetic Cube Background Box with optional LED strips by schiko further.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
With this connector for the Magnetic Cube Background Box with optional LED strips by schiko you can add additional panels to the top and sides of the core structure.
The connector has magnet holes, you should use the same layout of magnets as with you did for the panels.
When using the connector to extend the structure vertically, magnets are optional, they add rigidity, but if you printer prints with proper tolerances it will stack without magnets.
For extending the structure horizontally magnets are mandatory.
Supports are not needed to print this if the largest flat surface (the bottom) is flat to the plate.