1 / 3
Medtronic Paradigm Series 5 (5xx) belt clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cleaned up the original STL to allow proper bridging when slicing. It's not a perfect fit on my Paradigm 522
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Cleaned up the original STL to allow proper bridging when slicing. It's not a perfect fit on my Paradigm 522
Print Settings
Resolution:
0.3
Infill:
40%
Filament:
3D Hero PETG
Notes:
Print on the side with no support. I recommend using at least 3 perimeter lines and a somewhat flexible material.
PLA will snap easily as it ages. I used PETG, but ABS should work too.Category: Other