Tablet Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Remix of the modern Phone Stand from @Reckit
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 978
- Wydruki
- 0
- Wyświetlenia
- 6374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The accents (inlays) on the sides can be printed separately and then normally fit perfectly into the recesses without using glue (depends on the accuracy of your printer, otherwise just use a drop of glue)
Simply print 2 pieces of each inlay (all 6 pieces can be printed at once).
In terms of size, the stand could be printed as a whole, but a lot of material would be wasted for the supports.
That's why I cut it in half, so you can print it (almost) without supports (only for the inlay on the underside).
After printing simply stick it together and fix it with some glue.
In the pictures you can see how it should be printed.
Print Settings
- Printer: Prusa Mini+
- Nozzle: 0,4mm
- Layerheight: 0,20mm
- Infill: 30%
- Perimeter: 3
- Supports: Yes (for the Inlays)
Material
- PLA