KitchenAid Pasta Attachment Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,92 € – 6,01 € netto (bez VAT)
Dla pliku: KitchenAid Pasta Attachment Set.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,46 € netto (środek widełek).
- Masa podana przez autora
- 78 g
- Czas druku podany przez autora
- 5 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Design to hold the KitchenAid 3 piece Pasta Attachments!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is my first design! These prints hold the Pasta Roller, Fettuccine Cutter, and Spaghetti Cutter - the three attachments that come in the base package.
My print uses PLA, its a little more rigid and you should take care inserting the attachments. There is enough flex in the model that as long as you put one side in first and snap the other side into place, it works great.
I was thinking using a flexible filament could be better, but I haven't started working with them yet.