Shaving brush travel case with stand V2 (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've made a new shaving brush travel case that I feel is easier to use, and slightly more compact than the first one.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 299
- Wydruki
- 13
- Wyświetlenia
- 1013
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand.
In the end:
- it's slightly more compact
- there is a version of the stand in which you can insert a 1€ coin to add weight, making it easier to remove the brush without the stand tipping
- no need think about what to unscrew or unclip first to open or close the case, simply screw or unscrew
- it's more broadly compatible as the brush sits on the stand at the knot level, which comes in fairly standard sizes. I've included multiple case dimensions, of which you can find the details below, but you can also use the Fusion 360 (.f3d) file to adjust the model to your liking
Printing
I've printed mine in PETG, as it should better withstand exposure to humidity over time, but I'm sure PLA is fine too. I've had success with the model printed at either 0.1mm or 0.2mm layers.
No supports needed for the cover or the coin cap (if you printed the weighted stand version), however supports are needed for the stand, for the arms, and for the coin cavity.
Size chart
| (up to) | S | M (pictured) | L | XL |
| Knot | 19 mm | 21 mm | 23 mm | 25 mm |
| Loft | 50 mm | 55 mm | 55 mm | 60 mm |
| Handle diameter | 34 mm | 35 mm | 38 mm | 41 mm |
| Handle length | 40 mm | 45 mm | 50 mm | 55 mm |
There is some tolerance included in the model for these brush measurements. e.g. 3mm for the for a knot, so for a diameter of 21mm the space between the arms is actually 24mm.
I only have 1 shaving brush to test with, so I welcome any feedback on sizing that you may have! And if you post any makes, please add in which size you printed, it may help others ;-)
Adjustable dimensions
The main dimensions you can adjust in the Fusion360 files are:
- The knot diameter
- The loft
- The handle diameter
- The handle length
I have tolerances added, so you should be able to just put in the exact measurements for those.
Things you should double check before printing:
- check that the diameter is still large enough to accommodate for the coin cavity of the weighted stand
- check that the threading on the stand and on the cover on doing anything funky (in theory they shouldn't)
Happy printing!