1 / 4
Screwiverse Articulated Arm for Honeycomb Storage Wall — zdjęcie 1
1 / 4

Screwiverse Articulated Arm for Honeycomb Storage Wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An articulated arm with Screwiverse threads everywhere for attachment to a Honeycomb Storage Wall

Ocena
5 / 5
Polubienia
73
Pobrania
167
Wydruki
2
Wyświetlenia
1628
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an articulated ball-joint arm for the Screwiverse (and thus the Honeycomb Storage Wall). Any screwiverse attachment can be attached to this arm, even as a fixing screw to lock the position.

This arm is very useful to position webcams at weird angles using this adapter:

 

Printing Instructions

I suggest at least 3 walls. I added seam-grooves to the ball-joint for slicers to put their seams, which can ruin print-in-place parts when overextruding (looking at you, Prusa MINI). If the slicers don't put the seams into these grooves, try manually painting the seams or try your luck. With the input shaper firmware, printing at 0.35 STRUCTURAL and 150% speed works fine on a Prusa MINI.

Changelog

  • 22.03.2024: thicker ball joint and end stop for the thread

Tagi