BIQU H2 V2S Backplate for Ender 3 V1-2, CR10 and Aquila
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A backplate for the H2 , H2 V2 and H2 V2S extruder. For the Ender 3/CR10 carriage. Adaption for Aqulia X2.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PETG is flexible and the H2 is only secured at one end of the plate so having lots of anchor points to minimise flex is a good thing. This is a mash up of several designs.
21/03/24 Added a 35mm fan support duct to make the assembly even more rigid and prevent the H2 flexing away from the plate.
The duct secures the fan to the plate. To fit the fan support/duct remove the grill. I printed the duct with 100% infill but that's me being over cautious. After removing the grill the duct adds just 3 grams in weight. You will need longer m3 bolts to secure it to the fan.
