Sunglassesholder for XC40 Recharge (2024)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sunlgassesholder for the XC40 that can be glued underneath the engine start button with double sided tape
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 982
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A sunlgassesholder for the XC40 that can be glued underneath the engine start button with double sided tape. The holder should have one paticular place, where it fits quite nicely but it only really fits well in that position, i personally had no trouble finding it though.
Printed using PETG (because cars get really hot in the summer and PLA apparently warps).
For settings i placed it with the cup at the bottom (flipped to how it imports), with supports and fuzzy skin.
For taping it into the cars interior i used a about 1mm thick double sided tape and it seems to hold up so far really well. I can't say how it will behave once the temperatures inside the car are in summer though.