1 / 1

DUMMY 13 Micirama - NCC-1701-D - V1.0

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A scene for DUMMY 13

Aktualizacja u źródła: 23 kwi 2024

Informacje o modelu

20. Mar. 2024 V1.0:
first release

----------------------------------------------------------------------------------------------------------------

This is the first model from my new series "DUMMY 13 - Micirama" (Diorama by Mici).

You can find the other models for this scene here.

My themed collections: /@Mici/collections

----------------------------------------------------------------------------------------------------------------

Printing:

Please change the settings in the provided 3MF file (Prusa Slicer) to suit your requirements.

The larger parts fit on MK3s by turning them slightly (they are aligned already).

	Layer height	Brim	Supports
Scene plate	0.20mm	-	-
Scene arc	≤0.20mm	-	-
LCARS displays (0.25mm nozzle) Color change from black to white Use ironing	0.05mm	-	-
Panel - base	≤0.20mm	-	-
Panel - lights	≤0.20mm	-	-
Panel - hinge	≤0.20mm	-	-
Panel - monitor	≤0.20mm	-	-
Seat headrest	0.10mm	x	-
Seat	≤0.20mm	-	x (paint-on)
Seat - base	≤0.20mm	-	-
Seat - upholstery	0.10mm	x	-
Seat - backrest	0.10 mm	-	-

Assembly:

Seat Glue the headrest to the seat Glue the backrest to the seat. It should touch the headrest Glue the upholstery
Panel Glue the light onto the base Press in the hinge Slide the LCARS display at a slight angle to the top edge of the monitor and then press it in Put on the monitor
Put the seat bases into the scene base and glue them Glue the arc onto the scene base
Put the panel on the scene base Put the seats on the bases