1 / 12
Silica Gel Box with Sliding Lid (for 100 g gel) — zdjęcie 1
1 / 12

Silica Gel Box with Sliding Lid (for 100 g gel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

About This is a silica gel box for about 100 g of silica gel. The silica gel you use should be 2 mm in diameter or…

Ocena
4,824 / 5
Polubienia
143
Pobrania
1242
Wydruki
20
Wyświetlenia
4918
Oceny
17

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

About

This is a silica gel box for about 100 g of silica gel. The silica gel you use should be 2 mm in diameter or larger. The box has a lid that slides in place and it is secured with a single M3 head cap bolt (6 to 12 mm bolts will fit).

I keep one of these in each of my dry boxes that hold about 8 spools of filament, it keeps the humidity down and the prints are improved. The silica gel box is quite sturdy with 3 mm walls and could be made a little thinner if you want to save some filament, I will upload the step files so you can edit the design easliy. A complete (empty) box with lid is around 80 g.

Support

All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)

https://www.paypal.me/humebeamengineering

Threaded or heated insert?

I've uploaded two versions: One version is designed for a heated M3 insert, I use the Trianglelab inserts linked below under BOM myself.

The other version is threaded where you just need to screw in an M3 bolt, it's natually not as strong but is fine as long as you don't overtighten it.

BOM - Bill of Materials

You need some head cap allen bolts and some brass inserts. I use these:

M3 Hex Head Cap Allen Bolt (6 to 12 mm will fit)
Trianglelab M3 Brass Embedded Nut

You also need some Silica gel beads. I recommend these that change colour from blue to pink so you know when to reactivate/dry them:

500 g Silica Gel Beads (Blue)

Print Settings

Printer:

Qidi X-Max

Rafts: 

No

Supports:

No

Resolution: 

0.2 mm

Infill:

25%

Filament: eSUN ABS+ (Various colours)

Notes: 

Just print it. No supports are needed. The lid can be printed both normally and upside down depending on which finish you want, it can look quite nice printed upside down if you're printing on glass for example or on the textured side of the awesome Energetic PEI sheet.

It's available for most printers.

Pictures

Tagi