Tube Squeezer Frog, no supports needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🐸 Squeeze every last bit out of your toothpaste, food or whatever tube.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Empty your Tubes completely with style with this frog-shaped tube squeezer.
Just insert the back end of the tube on the back of the frogs mouth and pull it through.
The angled inset will squeeze any remaining content towards the front of the tube.
Printing advice: Due to the curvature of the model, printing at 0.1mm is recommended for this model, with 0.2mm layer height you will get visible lines at the corners.
To get the last bit out, tilt the frog slightly forward or backward so that you pull over one edge.
Source files included as always.