Nerf Challenger Switch Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting plate to position a snap-action micro switch. This will control the flywheel motors on a Nerf Challenger.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
I am modding my Nerf Challenger to take a 3S LiPo battery and I didn't want to just fit something in with hot glue.
The switch I am using: https://outofdarts.com/products/15a-microswitch-genuine-omron-v-15-3c5-spst
Because my switch doesn't have a lever or roller, I had to position it very close to the rev-trigger. And in order to shorten the throw of the rev trigger, I had to snip off a mm or two of the mechanical trigger-lock that the rev trigger interfaces with. I also cleared out all the structure related to the original switch in the grip.
The Fusion file has some parameters in it for the switch hole diameter and switch hole spacing. If you you want to alter this for a different switch, I would start there.
Print Details: Prusa MK3S+ with Inland PLA at 0.2MM Layer height. No supports or brim needed for me.
This is my second design from scratch, so feel free to provide any feedback.