Open Press Project - Base Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base stand for the Open Press Project, to gain additional height of the press above the table.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1062
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a base stand to accompany the Open Press Project 3D printed miniature etching press (https://openpressproject.com/), allowing it to stand higher on a table and allow room for a handle to still turn, with no modification to the press itself.
This has been designed to work with the remixed flywheel modification (https://www.printables.com/model/525119-open-press-project-flywheel-remix), and in a similar style to the original etching presses.
You will need to print two of these base parts - the bolt holes align with the original mounting holes in the Open Press. To attach them together, you will need 4x M5x20mm nuts and bolts. The base of the stand legs have countersunk mounting points, should you wish to screw the whole assembly down to a base board.
20% infill, 4 perimeters. No supports necessary.