Neopixel Holder for Troodon 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount to add Neopixel RGB LEDs to the top of your Troodon 350mm 3D Printer.
- Ocena
- 4,75 / 5
- Polubienia
- 14
- Pobrania
- 85
- Wydruki
- 3
- Wyświetlenia
- 603
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Consider supporting my work on Patreon:
https://www.patreon.com/c/Designbydave
A simple mount to add Neopixel RGB LEDs to the top of your Troodon 350mm 3D Printer. Just slide the LED strip into the slots in the holder. Mounts to the top of the Troodon enclosure using the existing M3 screws for the top clear panel. Secure in place with M3 nuts and large washer/spacers like M5 washers.
LEDs used - BTF-LIGHTING WS2812B - 22 LEDs per strip. Get the 3.2FT 60LED version. 88 total LEDs needed to cover all 4 sides of the printer - https://amzn.to/3DmnjAL
BTF-LIGHTING 20 Pairs JST SM 3 Pin Connectors - Used to connect each strip together in the corners. - https://amzn.to/4h9HcsF
I used a 24V to 5V buck converter coming from the main PSU for power.
For data, on the stock Troodon 2.0, I was able to use pin PG5 on the EXP1 header.