Molle Nerf Magazine Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single and Double stack magazine holders for Nerf and Foam Dart magazines that mount onto molle.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A molle mag holder for full length darts. Comes in both single stack and double stack configurations.
Printing Instructions:
For both mag holders, I recommend either using a brim or raft as I have had a few failed prints as the parts became detached at 95% complete.
Otherwise, no supports needed.
Assembly Instructions:
Weave the molle mount under all loops.
Use at least 2x M3x8mm screws to secure the holder to the mount. I recommend 2 vertically to prevent the mounts from falling out.
The system is designed in 0.5in increments so the holders can be mounted with one or two mounts.