Ender-5 Dual-Z Low Profile Bed Rod Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the z-axis rod mount to recover some lost Y-axis.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
When installing a second z-axis on your Ender-5, you sacrifice some Y-axis to the new bed rods and screw. The first part to interfere with your hotend is the Z-axis rod mounts installed to the top support beam. This part moves the rod down enough to clear most typical hot-ends. Once you install this, you can resize your bed in your slicer to ensure you're making the most of your Y-axis.
You can reuse the existing screws.
Because you'll be clamping, I recommend printing with at least 5 perimeters. It also helps if they're still warm from the print bed.