Box_Small
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5x5x5 version of Box
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The original BOX is huge. I was asked if it could be made smaller. It didn't like being re scaled in the slicer, so I scaled the original file and tweaked it some for the smaller footprint. The bonus is if your PLA has any give at all, you won't need to heat the tabs. Mine flexed right in.
The only real issue I faced was the bridging on the lid. I used a lot of supports there but I;'m sure it was mostly a settings issue for me.
CAD: ViaCAD 14
Slicer: Prusa
Printer: Anycubic Kobra 2 Plus
Filament: Mixed
Temps based on individual filaments.
Layer height: 0.2mm
Supports: Yes for the Lid only.