Voron 2.4 Angled RGB Daylight Stick holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the Daylight stick for a Voron printer
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I bought the 270mm daylight rgb sticks from Siboor. For my 350mm printer. Since i didn't like the small brackets i found online, i created an entire bracket to hold the sticks.
They are each held up against the extrusion with 2 M3x8 bolts. You'll need 2 M3 heated inserts and bolts to hold the stick in the bracket.
This was just a quick mockup and they work fine. They are angled downwards and give a nice glow to the entire board. If there are requests for different versions i will look into that. I'll probably make myself a diffuser once the printer is entirely set up.