Laptop Stand 2

Elevate your laptop experience with this sleek and functional 3D-printable Laptop Stand. Designed for both comfort and convenience, this stand ensures optimal viewing angles, reducing strain on your neck and enhancing overall productivity. Whether you're working from home, studying, or simply enjoying multimedia content, this stand provides a stable and stylish solution.

3D Print Settings:

• Material: PLA 
• Layer Height: 0.2mm for a balance of print speed and quality
• Infill: As given below.
• Supports: No

Instructions for Printing:

1. Download the .stl file.
2. Load the file into your preferred slicing software.

3. Adjust print settings according to the provided recommendations below (layer height, infill)

• Keep the top and bottom layer 0 to reveal the infill pattern design.

• Keep perimeters between 3 to 5 for added strength.

• Keep the Fill density from 7 to 10 according to your preference.
• Experiment with diff. Fill patterns for variety in design.

• Try changing the Fill angle to adjust the infill pattern alignment.

• Keep Skirt Loops 0 to keep the object within the print area. ( This model is designed for 220 x 220 x 270 build plate) If your build plate is bigger, then you don't need to worry about this setting.

• Final design according to the given settings.

4. Choose PLA as the printing material.

5. Export the G-code and start the 3D printing process, ensuring a well-levelled bed and proper adhesion.

Usage Guidelines:

1. Once printed, Stick the stand on your table with 3M double tape.
2. Place your laptop securely on the stand.
3. Adjust the viewing angle for optimal comfort.
4. Enjoy an enhanced computing experience with improved posture and reduced strain.