The Edge: Dawnfall Warchest + Expansions INSERT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Edge: Dawnfall Warchest + Shrines And Sources + Stretch Goals + Darkness
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT:
01.06.2024 - Uploaded Lid 2 For Shrines (2nd Box - Shrines) (put them on top of each other)
02.06.2024 -Uploaded Shrines Hex Tiles (2nd Box)
---------------------------------
Hi everyone, i created Insert for The Edge: Dawnfall Warchest + Shrines And Sources + Stretch Goals + Darkness - because i could not find one that i would like.
I was able to fit everything in the Main Box + Shrines And Sources Box.
Tips:
-Minis from Stretch Goals have slightly smaller Base - so they have to go on the same place as in the pictures
-No supports needed for printing
-Main Box Dimensions: 614 x 300 x 144 mm
-Shrines & Sources 330 x 249 x 66 mm
------------------
I Am using thin sleaves (65*90mm)
I have used: The-Boardgame-Insert-Toolkit
I have used: Customizable Card Organizer - Board Game Box Organizer
I have used: Fusions360 for personal use
------------------
My print setup in Prusa Slicer
Nozzle - 6mm
Layers and perimeters:
Solid Layers - Top = 0; Bottom = 0
Perimeters - 3
Seam position - Aligned
Perimeter generator - Arachne
Infill
Fill density - 40%
Fill pattern - Cubic