AirUp PodBox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storagebox for the AirUP flavor pods
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I've created this storage Box for my AirUP flavor pods because they were laying around everywhere before.
I wanted to create an easy to print box with a lid.
I used the following print settings:
Infill: 10% support-cubic
Support: tree support (If you feel good with your bridging, no support should be needed)
Layerhight: 0.16
There are two lids included. One is the single color lid, the other one is with a seperate letter file, so MMU color print is possible. Just choose which one fits better.
Also, I've included my TestPrint file, just because I have it. I've used it to test the pod fitting.
Any suggestions for improvements or any other feedbacks are much appreciated.