Bauhaus connectors remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the connectors for the Bauhaus trays by AndrzejG, printing a bit stronger with 0.6mm nozzle.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 90
- Wydruki
- 4
- Wyświetlenia
- 372
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like the Bauhaus trays by AndrzejG, very stylish and useful: excellent.
With the connectors I didn't have much luck printing in PETG with 0.6mm nozzle: I'd break them too often.
I changed the model to work better on my printer, will probably work with 0.4mm as well.
I also made the top rounded, to make it easier to push the modules together.
Printing
I printed the connectors as oriented in the model. in PETG with 0.6mm nozzle and 0.3mm layer height.
On satin sheet with some Printafix spray the adhesion was good, no brim was needed.
I don't think this model adheres to the Bauhaus design principles, sorry 😊
Bart