FALLOUT 76 - SECRET SERVICE HELMET
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey all, this is my set of print files for the "secret service" helmet from Fallout 76.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 1537
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution
Included is everything needed to print the assembly shown in the pictures, i've also designed this helmet to be assembled using hardware. You'll need 10X2MM circular magnets to insert into the facemask and dome pieces so they can snap together, as well as into the side mounted hose clamps. Every other accessory is designed to be glued, or screwed in place using a #8/3/4" screw.
I've also designed the flashlight to be fully functioning, meaning that it can be assembled with a single LED diode. There is a channel to run wires from said diode to the inside of the helmet to a battery pack. I've also designed a small "lense" thats intended to be printed with translucent filament so the light will shine through.
I've included more specific assembly reference images for each assembly in their dedicated folders.
Feel free to comment any questions or concerns :)