Tiny clothespin - single print in place part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny clothespin, modelled from scratch for 3D printing.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 227
- Wydruki
- 2
- Wyświetlenia
- 909
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
It's a tiny clothespin, but as a single part and print-in-place. It uses a ‘snake-bite' to hold material together because it doesn't have any extra force pushing the clamp closed.
The force is much less then you'd get from a clothespin with a metal spring inside (or at least one that has a separate part to tension it.) Use it when you know that you only need very little clamping force or have a somewhat stiff/thick cloth to hold in place. Can also be used to close chip bags and such. Or use it as a case study for your own clothespin designs!
How to print
- For 0.6 nozzle: use 3 perimeters
- For 0.4 nozzle: use 4 or 5 perimeters
- DO NOT use any top or bottom layers
- DO NOT use any infill
- This parts gains it's strength and springiness from the perimeters alone!
- Stay away from brittle materials for this model; PETG has been tested and works great.
Need a clothespin with a little more clamping force and is a little bigger?
Check out my other clothespin design: https://www.printables.com/model/815523-minimalistic-clothespin-with-snake-bite-grip