1 / 1
Printable Protractor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a new project I'm working on, but I needed to have an idea of the angles involved.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 1764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution
I have a new project I'm working on, but I needed to have an idea of the angles involved. I couldn't find a protractor, so I made one. :)
The protractor has two sets of angle-finders, an inner and an outer ring. The marks on each ring are 10 degrees apart. The two rings are set 5 degrees from one another.
If you require a greater degree of measurement, you could always edit the OpenSCAD file to include finer gradations. For my purposes, this worked really well.
Print instructions
Instructions
- Print.
- Measure stuff.
- Profit!